EPDM Rubber Waterproofing Membrane
Rubber membrane is produced from artificial EPDM rubber. The EPDM rubber membranes is a solitary-ply membrane that can be used for numerous apps this kind of as waterproofing of basements, roofs/terraces, enlargement joints, damp areas (bathroom blocks), facades, and many others. It is a single product that can be employed for waterproofing most components of a building. The EPDM rubber waterproofing membranes are techno-commercially significantly greater than substitutes this kind of as biHangZhou membranes, crystalline goods, admixtures, various coatings, and so forth. The use of these merchandise could be prevented in tasks in which EPDM rubber membranes are utilized. The EPDM waterproofing membranes are an excellent substitute to the torch-on membranes.
Benefit:
- Resistant to UV, Ozone, and air pollutants.
- Broad range of temperature resistance type -40 degC to +160 degC.
- Almost thousands and thousands of sq. meters of EPDM membrane have been mounted on rooftops EPTly and they are recognized to have a provider lifestyle of over and above 30 many years.
- No torches or gasoline needed throughout set up.
- EPT free and heat totally free installations.
- It is an environmentally and recyclable system.
- Lightweight: close to one.25Kgs/SQM.
- Solitary item for various places this sort of as basements, roofs, podiums/landscape places, growth joints, etc.
- Functions as an anti-root barrier. So they are concept for eco-friendly roofs and landscape tasks.
- Unique quality of EPDM membrane are fire resistant.
| Thickness(mm): | one., 1.two, 1.5, one.8, two. |
| Allowable deviation(%): | -10 to +15 |
| Width(mm): | one thousand, 1200 |
| EPDM waterproof roll specification: | |||
| No. | Products | Technical Indicators | |
| 1 | Tensile Power (MPa) | ge7.five | |
| two | Breaking EEPTation | ge450% | |
| ge200% | |||
| 3 | Tear Toughness kN/m | ge25 | |
| 4 | EPTermeability, .3Mpa, 30 minutes | No leaking | |
| five | Reduced Temperature FleXiHu (West Lake) Dis.bility | le-40 ordmC | |
| six | Thermal Steadiness (mm) | Prolong | le2mm |
| Shrink | le4mm | ||
| 7 | Hot Air Getting older (80 ordmC times168h) | Tensile Retention | ge80% |
| Breaking EEPTation Retention | ge70% | ||
| 8 | Alkali Resistance, Saturated Ca(OH)two Solution, 23 ordmC times168h | Tensile Retention | ge80% |
| Breaking EEPTation Retention | ge80% | ||
| nine | Ozone Aging(40 ordmC times168h) | EEPTation 40%, 500pphm | No crack |
| ten | Artificial Weathering Ageing | Tensile Retention | ge80% |
| Breaking EEPTation Retention | ge70% | ||
| 11 | Bonding Peel Strength (Sheet and Sheet) | N/mm (StXiHu (West Lake) Dis.Hu (West Lake) Dis.rd Check Problems) | ge1.five |
| Soaking Retention Charge(23 ordmC times168h) | ge70% | ||
| Adhesive property: The offset and stripping size from the foundation line is significantly less than 5mm, there is no damaging deviation and abnormal level. | |||
Application:
one) Roofs, basement, bathroom, bridge, underground, tunnel and dam.
2) EPT and civil building water-resistant.
3) Geo-synthetic liner for swimming pool, channels, irrigation method
four) EEPTly for initiatives with higher demands in longevity, anti-corrosion and deformation.
Building Method:
1). Ensure all surface area are thoroughly clean,dry and dust-totally free. Take away any free particles and any rust with a wire brush amp comfortable broom.
two).Roll out the membrane.
3).Eliminate the backing paper and area the adhesive side to the beforehand geared up surface area.
four).To ensure a tigEPT speak to-clean the EPT down with a dry cloth, remocing all the air bubbles
five).Press the EPT to the surface firmly as soon as in position.
6).Smooth flat all edages with a wallpaper roller or trowel.
seven).Following use reseal pack and retailer uprigEPT in cool,dry issue.
Storage and Transportation:
one) Waterproof components should be stored unEPTdry and ventilated conditions.
2) Various kinds of membranes need to be piled separately.
3) UnEPTusual issue, storage period of time is a single calendar year considering that production date.
four) Waterproof materials need to be put vertically during transportation.
5) It need to be kept away from sunshine and rainwater.
6) Transport and storage approach need to be away from the fireplace resource, storage temperature does not exceed 35 ordmC, the storage period is 1 year.
Certifications:
